Intermec PB51

Chapter 2 — Conguring the PB51
26 PB51 Mobile Label and Receipt Printer User’s Guide
Changing Conguration Settings From the Printer
Home Page
If you have an 802.11 radio in your PB51 printer an d it is connected to
the network, you can use your web browser to open the printer home
page and make conguration changes. To connect to a wireless
network, follow the procedure in
“Setting Up 802.11 Radio
Communications” on page 28
.
The PB51 Printer Home Page
To make changes to the conguration
tFrom the home page, click Conguration .
Changing Conguration Settings From SmartSystems
Console
You can use the SmartSystems Console to change configuration
settings on your printer. The PB51 ships with the S martSystems client
loaded on it. The console is part of SmartSystems F oundation and is
available from the Intermec web site. To download SmartSystems
Foundation, go to
www.intermec.com/products/
smrtsysfoundation/index.aspx
.