Intermec PB51

Chapter 2 — Conguring the PB51
PB51 Mobile Label and Receipt Printer User’s Guide 23
Changing Conguration Settings
There are several ways you can change the conguration settings of
the printer. You can change the conguration setti ngs:
tfrom the display.
tfrom the host PC using PrintSet.
tfrom the host PC using the command line.
tfrom the printer home page.
tfrom the SmartSystems Console.
Changing Conguration Settings From the Display
You need to enter Setup mode before you can change conguration
settings. For more information on entering Setup mo de and
navigating through the settings, see
“Understanding Setup Mode”
on page 19
.
The top levels of the Setup menu are organized in a one-way loop.
Each level has several sub-levels.
Dump Mode This options enters Dump mode. For more
information
on Dump mode, see
“Troubleshooting Communication
Problems” on page 46
.
Factory Default This option restores the factory def ault
settings. Press to select this option and
then follow the instructions on the screen.
Setup and Exit This option exits Extend
ed Test mode and
puts the printer in Setup mode.
Exit This option exits Extended Test mode.
Options in Extended Test Mode (continued)
Function Description
Note: The ESC/P printer does not have a Setup menu.