Intermec PF2i - Page 163

Appendix B — Default Settings
PF2i and PF4i Mid-Range Printer User’s Manual 149
Network Parameters
Parameter Default Value
IP selection DHCP+BOOTP
IP address N/A
Netmask N/A
Default router N/A
IPv6 selection Auto
IPv6 address N/A
Nameserver N/A
Nameserver6 N/A
DHCP response Broadcast
MAC address N/A
Network type Ethernet (if no 802.11 radio is installed)
Wireless 802.11 (if an 802.11 radio is installed)
RFID Parameters
Parameter Default Value
Mode Enable
Tagadjust +0%
Retries 1
Voidtext N/A
Fieldstrength 100
Feedadjust Parameters
Parameter Default Value
Startadjust 0
Stopadjust 0