Intermec PF2i - Page 164

Appendix B — Default Settings
150 PF2i and PF4i Mid-Range Printer User’s Manual
Media Parameters
Parameter Default Value
X-start
8 dots/mm = 203.2 dpi
11.81 dots/mm = 300 dpi
24 dots
36 dots
Width
8 dots/mm = 203.2 dpi
11.81 dots/mm = 300 dpi
832 dots
1248 dots
Length
8 dots/mm = 203.2 dpi
11.81 dots/mm = 300 dpi
1200 dots
1800 dots
Media type Label (with gaps)
Paper type Thermal transfer
Ribbon constant 90
Ribbon factor 25
Label offset 0
Ribbon sensor 14
Low diameter (ribbon) 0 dots
Label constant 85
Label factor 40
Contrast +0%
Paper sensor 10
Low diameter (paper) 0 dots
Testfeed N/A
Testfeed mode Fast
Len (slow mode) 0
Print Defines Parameters
Parameter Default Value
Head resistance N/A
Testprint N/A
Print speed 100 mm/sec
LSS test N/A
Clip default Off
Cmd language N/A