Intermec PM43 User Manual

Chapter 5 — Troubleshoot the Printer
94 PM23c, PM43, and PM43c Mid-Range Printer User Manual
Restore Defaults with a Hardware-Based Reset
You can restore the printer defaults on a full touch or icon printer by
performing a hardware-based reset.
1 Turn the printer off and open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the
printhead.
3 Turn the printer on while pressing and holding the Feed button.
4 Release the Feed button when the status bar is nearly full (on the
full touch printer) or when the last two LEDs remain lit (on the
icon printer).
All of the settings are restored on the printer.
5 Turn the printhead lift lever clockwise to lower the printhead and
close the media cover.
How to Upgrade the Printer Firmware
You should check for periodic updates to the printer firmware.
Updated firmware can include bug fixes or additional features that you
might find useful. The latest version of the firmware is available from
the PM23c, PM43, or PM43c printer Downloads page on
www.intermec.com.
You can upgrade the printer firmware using:
• the printer web page.
• a USB storage device.
• PrintSet 5. For more information, see the PrintSet 5 online help.
Note: Although this procedure restores all defaults on the full touch
printer, it only restores settings on the icon printer. You need to use
PrintSet or another method to restore all defaults on an icon printer.
Note: After you upgrade the printer firmware, Intermec recommends
that you restore the default settings and calibrate the media sensors.

Intermec PM43 Specifications

General

Color	-
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	108 mm
Ethernet LAN	Yes
Optional connectivity	Bluetooth, Wireless LAN
USB 2.0 ports quantity	1
Connectivity technology	Wired
Certification	RoHS, CE (EN55022 Class A), FCC Class A, UL/cUL, D Mark and CCC
Internal memory	128 MB
Built-in barcodes	1D, 2D
Image formats supported	BMP, GIF, PCX, PNG
Page description languages	DP, DPL, IPL, XML, ZPL II
Display	LCD
Control type	Touch
Product color	Gray
PC connection	RS-232
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
AC input frequency	45 - 65 Hz
Power consumption (standby)	9 W
Media thickness	3 - 10.4 mm
Maximum label width	114 mm
Maximum roll diameter	80 mm
Languages support	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, KOR, POR, RUS
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	483.54 mm
Width	284.2 mm
Height	294.61 mm
Weight	15820 g