EasyManuals Logo

Intermec PM43 User Manual

Intermec PM43
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
Chapter 6 — Maintain the Printer
100 PM23c, PM43, and PM43c Mid-Range Printer User Manual
Clean the Media Guides
Both the upper and lower media guides are transparent to allow light
to pass between the two parts of the label gap and label mark sensors.
It is important to keep these surfaces free of dust, stuck labels, and
adhesive residue.
1 Turn the printer off and disconnect the printer from power.
2 Open the media cover.
3 Remove the media and ribbon (if installed).
4 Insert a cleaning card or a soft cloth soaked in isopropyl alcohol
between the two media guides to clean them.
5 Wait for approximately 30 seconds to allow the cleaning fluid to
dissolve the residue.
6 Once the parts are dry, replace the media (and ribbon) in the
printer.
7 Close the media cover, reconnect power, and turn on the printer.
Clean the Exterior of the Printer
Make sure to keep the exterior of the printer clean. Maintaining a clean
exterior will reduce the risk of dust or foreign particles reaching the
inside of the printer and affecting printer functionality.
Use a soft cloth, possibly moistened with water or a mild detergent,
when cleaning the printer exterior.
Make sure to keep the surface surrounding the printer clean as well.
Clean the Cutter
You should clean the cutter every time you clean the printhead. It is
important to keep the cutter clean to prolong the life of the cutter.
1 Turn the printer off and disconnect the printer from power.
2 Open the cutter door.
3 Use a swab soaked in isopropyl alcohol to clean the cutter opening.
4 Once the cutter is dry, close the cutter door, reconnect power, and
turn on the printer.

Table of Contents

Other manuals for Intermec PM43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec PM43 and is the answer not in the manual?

Intermec PM43 Specifications

General IconGeneral
Color-
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Maximum print height- mm
Maximum printing width108 mm
Ethernet LANYes
Optional connectivityBluetooth, Wireless LAN
USB 2.0 ports quantity1
Connectivity technologyWired
CertificationRoHS, CE (EN55022 Class A), FCC Class A, UL/cUL, D Mark and CCC
Internal memory128 MB
Built-in barcodes1D, 2D
Image formats supportedBMP, GIF, PCX, PNG
Page description languagesDP, DPL, IPL, XML, ZPL II
DisplayLCD
Control typeTouch
Product colorGray
PC connectionRS-232
Sustainability certificatesENERGY STAR
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)20 - 80 %
AC input voltage100 - 240 V
AC input frequency45 - 65 Hz
Power consumption (standby)9 W
Media thickness3 - 10.4 mm
Maximum label width114 mm
Maximum roll diameter80 mm
Languages supportCHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, KOR, POR, RUS
Harmonized System (HS) code84433210
Weight and Dimensions IconWeight and Dimensions
Depth483.54 mm
Width284.2 mm
Height294.61 mm
Weight15820 g

Related product manuals