Intermec PR3

Chapter 2 — Connect and Configure the Printer
24 PR2 and PR3 Mobile Receipt Printer User Manual
About the Printer Web Page
An easy way to configure most printer settings is to view and change
settings from the printer web page. You view the printer web page in a
web browser.
Configure the Printer from the Web Page
To configure the printer from the printer web page, you need to turn
on the printer and connect to your Wi-Fi network.
1 On your desktop PC, open a web browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
3 Click Configuration.
4 When prompted, type your Username and Password. The default
username is admin and the default password is pass.
5 Click Login.
6 Change the necessary settings.
7 When you are done, click Submit.
Note: To use the printer web page, you need to turn on the printer and
connect to your Wi-Fi network.
Printer Web Pages
Page Description
Home Displays current printer settings.
Configuration Allows you to change printer configuration settings, such as
wireless 802.11 communications or system settings.
Maintenance Allows you to upgrade printer firmware.
Support Provides general Intermec contact information.
Note: If you are not using a DHCP network and you do not know your
printer IP address, you must configure Wi-Fi settings using Intermec
PrintSet 5.2 or later with a USB connection.