Intermec PR3

Chapter 3 — Troubleshoot and Maintain the Printer
30 PR2 and PR3 Mobile Receipt Printer User Manual
Get Printer Information Using PrintSet
To get printer information using PrintSet 5.2 or later, you connect
your printer to a desktop PC through a USB connection.
1 Connect your printer to a desktop PC with a USB cable.
2 Download and install Intermec PrintSet 5.2 or later from the
Intermec website at www.intermec.com.
3 Use PrintSet to add your printer to PrintSet and view printer
settings.
About the Printer Test Label
You can print a test label to:
• check print quality.
• get configuration settings.
• view printing statistics.
Test Label Contents
The printer test label contains a QR Code for the printer registration
web page, configuration information, printing statistics, and system
information.
Note: The first time you create a USB connection to a desktop PC, you
must use Intermec InterDriver to install the appropriate driver
software on your PC.
Test Label Contents
Category Contents
QR Code QR Code for the Intermec printer registration web page
Media & Printing
Configuration
Media Type
Media Length
Media Width
Start Adjustment
Stop Adjustment
Font Resources