Intermec PR3

Appendix B — Printer Settings
52 PR2 and PR3 Mobile Receipt Printer User Manual
Wireless 802.11 General Settings
You can view and configure wireless 802.11 general settings from:
• the printer web page.
• PrintSet version 5.2 or later.
Wireless 802.11 General Settings
Setting Description Default
Channel If you select Adhoc as your Network
Type, specifies the channel (from 1
through 14) over which to transfer
data.
1
Network Name
(SSID)
Specifies the name of the wireless
network.
INTERMEC
Network Type Specifies how the printer
communicates with other devices:
• Infrastructure: Devices on the
network communicate with each
other through access points. In
Infrastructure Mode, wireless
and wired devices can
communicate with each other.
• Adhoc: Devices on the network
communicate without using
access points. Ad hoc mode is
useful for establishing a network
where wireless infrastructure
does not exist or where services
are not required.
Infrastructure
Power Mode Specifies the power management
setting for the radio:
• Constant Awake Mode
• Fast Power Saving
• Power Saving
Constant Awake
Mode