Intermec PR3

Appendix B — Printer Settings
PR2 and PR3 Mobile Receipt Printer User Manual 55
Wireless 802.11 Security Settings
You can view and configure wireless 802.11 security settings from:
• the printer web page.
• PrintSet version 5.2 or later.
IP Address (IPv6) Specifies the unique network level
address assigned to each device in a
TCP/IP network.
N/A
Subnet Mask Specifies a number that defines the
range of IP addresses that can be
used in a TCP/IP network.
0.0.0.0
Wireless 802.11 Network Settings (Continued)
Setting Description Default
Wireless 802.11 Security Settings
Setting Description Default
Security Type Selects the protocol the radio uses
to verify its identity and makes sure
that it is authorized to
communicate on the wireless
network.
None
Association Specifies the security method
(depending on the security type)
used to grant access to the wireless
network:
• Open/WEP
• Shared/WEP
• WPA/TKIP
• WPA2/AES
Open/WEP
Pre-Shared Key For WPA and WPA2 security,
specifies the passphrase that allows
the radio to authenticate over the
wireless network. Range is 8 to 64
characters.
None
Network Key Index Selects the active network key to use
for WEP security. Range is 1 to 4.
None