Intermec PR3

Appendix B — Printer Settings
56 PR2 and PR3 Mobile Receipt Printer User Manual
Network Key 1,
Network Key 2,
Network Key 3,
Network Key 4
Defines a network key that is used
for WEP security. Keys are entered in
ASCII or hexadecimal (preceded by
0x) format.
Empty string
Username Sets the name that the printer uses
when logging in to the
network.Range is 1 to 96 characters.
None
Password Sets the password that the printer
uses when logging in to the
network. Range is 1 to 96 characters.
None
Anonymous Name? Sets the outer EAP user name that
the printer uses for logging in to the
network. Maximum length is 96
characters.
Anonymous
Inner
Authentication
Selects the authentication method
that is used when the EAP type is
EAP-FAST, PEAP, or TTLS.
EAP/MSCHAPv2
CA Certificate Sets the name of the Certificate
Authority (CA) that verifies the
server certificate. This CA should be
the same one that was used to sign
the server certificate.
intermec.pem
Client Certificate Sets the name of the client
certificate the printer uses to
authenticate to the network using
EAP-TLS. Maximum length is 128
characters.
None
Client Key Sets the private key the printer uses
for EAP-TLS. Maximum length is
128 characters. Use the
certinstall.sh script to install the
certificate correctly.
None
Server Common
Name 1
Sets the certificate name that is on
the primary authentication server. If
this value is none, then the value for
Server Common Name 2 is
used.Range is 1 to 96 characters.
None
Wireless 802.11 Security Settings (Continued)
Setting Description Default