Chapter 2 — Connect and Configure the Printer
PR2 and PR3 Mobile Receipt Printer User Manual 25
Configure the Printer Using PrintSet
To configure your printer using PrintSet 5.2 or later, you connect your
printer to a desktop PC through a USB connection.
1 Connect your printer to a desktop PC with a USB cable.
2 Download and install Intermec PrintSet 5.2 or later from the
Intermec website at www.intermec.com.
3 Use PrintSet to add your printer to PrintSet and configure printer
settings.
Note: The first time you create a USB connection to a desktop PC, you
must use Intermec InterDriver to install the appropriate driver
software on your PC.
To Next Page
Loading...
