Intermec PR3

Appendix B — Printer Settings
PR2 and PR3 Mobile Receipt Printer User Manual 57
Server Common
Name 2
Sets the certificate name that is on
the secondary authentication
server.If this value is none, then the
value for Server Common Name 1 is
used.Range is 1 to 96 characters.
None
Validate Certificate Determines if the identity of the
authentication server is verified
using its certificate when using
EAP-TTLS, PEAP, or
EAP-TLS.Intermec recommends
that you set Validate Certificate to
Yes.
No
PAC Sets the name of the Protected
Access Credential (PAC) that is used
for EAP-FAST authentication. The
printer uses this file if Acquire PAC
is on and the current installed PAC
fails to authenticate the printer to
the network.
eap-fast.pac
Acquire PAC Determines if automatic PAC file
provisioning is on for EAP-FAST
authentication.
Off
Fast Roaming
(CCKM)
Determines if the printer can roam
from one access point to another
without reauthenticating with the
server. CCKM only works in wireless
networks using LEAP.
Disable
Mixed Mode
(Group = TKIP)
Determines if the printer can use
either TKIP or AES for data
encryption, depending on the
configuration of the access point.
Disable
Wireless 802.11 Security Settings (Continued)
Setting Description Default