Intermec SR61T1D

Chapter 2 — Scanning With the SR61T
SR61T Tethered Scanner User’s Guide 15
Using Vibrate Alert
The vibrate alert functions makes the scanner vibrate in addition to
the lights and beeps. This feature can be useful in these situations:
• You are in a noisy environment, such as a busy warehouse, where it
can be difficult to hear the beep.
• You are working in a quiet environment, such as a library, where
you do not want to make a lot of noise.
By default the scanner vibrates at power-up. You can also configure
the SR61T to vibrate when it successfully decodes a bar code.
To turn on vibrate alert
• Scan this bar code:
Turn On Vibrate Alert
To turn off vibrate alert
• Scan this bar code:
Turn off Vibrate Alert
Note: For more vibrate alert functions such as error vibrate alert, see
EasySet version 5.6.5.4 or later.