Chapter 5 — Troubleshooting and Maintaining the SR61T
SR61T Tethered Scanner User’s Guide 45
When the firmware download is complete, the “Operation
successful” message appears.
12 Click Finish. You have successfully upgraded your scanner
firmware.
Scanner Recovery
If something happens to your scanner and it does not turn on despite
using the correct cables and power supply, the only way to recover the
scanner is to reinstall the firmware. This is only possible when using
the download cable (contact your Intermec representative).
Note: If your scanner cannot scan the bar code on your computer
screen see “Problems and Possible Solutions” on page 39to find
the firmware upgrade bar code. Print the page out and scan the bar
code.
Note: If the firmware download is not successful, you must restart the
firmware download procedure.
To Next Page
Loading...
