Intermec SR61T1D

Appendix A — Specifications and Reading Distances
SR61T Tethered Scanner User’s Guide 51
* = These symbologies are only available with SR61TL (laser scanner).
Reading Distances
The reading distances for each scanner are typical distances measured
in an office environment with extended reading activated by default
(200 lux). Extended reading range is available for scanners with
software version BF4_252 and later.
GS1 DataBar Expanded* Telepen
GS1 DataBar Limited* TLC 39
Bar Code Symbologies for 1D Models (SR61T1D and SR61TL)
Note: Minimum distances depend on the number of characters
encoded in the bar code.