Chapter 3 — SR61T Interfaces
SR61T Tethered Scanner User’s Guide 27
4 Turn on the host device.
5 If necessary, use the configuration bar codes in the next section to
configure your SR61T serial parameters to match the PC.
The default serial parameters for the SR61T are:
Setting up the RS-232 Interface
This section provides configuration bar codes for a basic setup. All bar
codes marked with (*) indicate the default value. For more
configuration options see Chapter 4, "Configuring the SR61T” on
page 31.
Baud Rate
38400
57600 (*)
115200
128000
230400
Serial Parameter Default Setting
Baud rate 57600
Data bits 8
Parity None
Stop bits 1
To Next Page
Loading...
