Storage
29
The pump will fill with water again and can be switched on.
13. Check the connections regularly to ensure that they are not blocked and good fil-
tration is possible.
All of the filter cartridges used must be disposed of in accordance with the applica-
ble local regulations and laws.
Cleaning the skimmer
− Remove the filter basket
36
and the floating cover
37
from the skimmer
35
and clean both parts under running water.
− Remove the skimmer hose
33
from the skimmer once a week and check that the
filter in the base of the skimmer is free of dirt, hair and algae.
Storage
− Disassemble the pool, the pump and the skimmer
35
(see the sections ‘Dis-
assembling the pool for long-term storage’ and ‘Disassembling the pump and
skimmer’).
− Clean all parts and allow them to dry completely.
− Store all parts in their original packaging as far as possible.
− Store all parts in a dry place at 0 °C to 40 °C, ensuring that they are out of the
reach of children.
Troubleshooting
Problem Possible cause Solution
The water is green-
ish, there are green
or black dirt depos-
its on the pool liner.
The pool liner is
slippery and/or
smells bad.
• Chlorine and pH values
are not adjusted cor-
rectly.
− Administer a “shock” treat-
ment with an overdose of
chlorine.
− Check the pH value and
adjust it to the value recom-
mended by your specialist
pool supplier.
− Vacuum the pool floor.
− Make sure that the chlorine
value is correct.
To Next Page
Loading...
