Water maintenance and chemicals
25
3. Let the water drain out of the pump housing.
4. Allow all of the individual parts of the pump, the skimmer
35
and all hoses to dry
thoroughly in the air.
5. Clean the filter cartridge
21
(see the section ‘Cleaning and replacing the filter
cartridge’).
Depending on the wear on the filter cartridge, a new cartridge may be required
for the next season. Keep a spare cartridge in case it is required.
6. In order to ensure flexibility during long-term storage, we recommend rubbing
appropriate care products into the sealing ring, the rubber ring on the air outlet
valve
18
and the rubber rings on the pump hose connections.
7. To disassemble the skimmer, follow the assembly instructions in reverse order (see
the section “Fitting the skimmer”).
Water maintenance and chemicals
WARNING!
Risk of injury and health!
Improper use of chemicals can cause injury and an increased health
risk.
− Always keep the pool and the pool water clean.
− Always follow the instructions of the chemical manufacturer
and the health and safety warnings.
− Do not add chemicals to the pool while it is being used. This
could irritate the skin and eyes.
− Keep chemicals out of the reach of children.
NOTICE!
Risk of damage!
Water treatment products and concentrated chlorine solution can
damage the pool liner and the pump. Chlorine solution can dam-
age plants.
− Ensure that no excess doses of water treatment products or con-
centrated chlorine solution come into contact with the pool liner.
To Next Page
Loading...
