EasyManua.ls Logo

Intex 28214 - Checking the Pool and the Package Contents; Assembly; Choosing the Right Location and Preparing the Subsurface

Intex 28214
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking the pool and the package contents
16
Checking the pool and the package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging, you may
damage the pool.
Be very careful when opening.
1. Take the pool out of the packaging.
2. Check to make sure that all parts are included (see Fig.A–C, E).
3. Check the pool and the individual parts for damage. If this is the case, do not use
the pool. Contact the manufacturer at the service address given on the warranty
card.
Assembly
Choosing the right location and preparing the
subsurface
WARNING!
Risk of injury!
Improper assembly of the pool may cause injury.
Always assemble the pool with at least 2 adults.
Read the safety instructions at the start of the user manual.
NOTICE!
Risk of damage!
Improper assembly of the pool may cause damage to the pool liner
and the pool.
Do not drag the pool liner over the ground as this can cause
holes and other damage to the pool.
When selecting the correct location, follow the instructions below:

Related product manuals