Operating Manual for Digital Sound Processor (DSP) V3.0
WWW.INTREND-AV.RU
10
1.6 Typical System Application
Conference Amplifying System: The processor can be connected to capacitor microphone, local
output amplifier and speaker so as to decorate and process with the signals via the speaker on
output channel. The output signal can also transmitted to the recording device with Dante interface
via such interface, such as computers with Dante virtual soundcard. By adopting a simple control
panel, volume adjustment, scenario call and other functions can be achieved via UDP control
processor.
Dante Application: Dante network breaks through space limitations, and has a wide range of
application scenarios. It can connect all devices that support Dante protocol to the same local area
network. By cascading 2 DSPs, it supports the access of up to 32 analog microphones and 32 Dante
microphones. Each processor will conduct first-level auto mixing on its own microphones, and the
second-level auto mixing is then made on the mixed signal via the auto mixer of main processor so
that more microphones can be connected to build a larger auto mixing matrix. The two-level auto
mixing working mode can satisfy general application scenarios.
To Next Page
Loading...
Need help?
General