Operating Manual for Digital Sound Processor (DSP) V3.0
WWW.INTREND-AV.RU
28
Each segment of equalizer has a switch, which is used to turn on or turn off the corresponding
segment. After being closed, the parameter setting will not work. The equalizer has a master switch,
which is used to enable or disenable a module.
Parametric equilibria have 5,8,12 options
3.4.6 Figure Balancer
By using constant Q value technology, each frequency point is equipped with a push-pull
potentiometer. The bandwidth of the filter remains unchanged regardless of the frequency
raised or attenuated. The common professional graphic equalizer is to divide 20 Hz~20 kHz
signals into 10,15,27,31 to adjust.
The graphical balance currently has 10,15 and 31 options
3.4.7 Feedback Inhibition
While using the feedback inhibition module, we'd better combine well with good systematic
designs and practical projects but not to replace good systematic designs. The traditional methods
shall still be used, such as limiting the number of microphones to be opened, minimizing the distance
between sound source and microphone, positioning the microphone and loudspeaker to get
To Next Page
Loading...
Need help?
General