Operating Manual for Digital Sound Processor (DSP) V3.0
WWW.INTREND-AV.RU
68
5
.4 ASCII control command
Preface:
Co
ncentrate:
1, because the starting bit of the channel is 0, it can be understood that the 0-3 channel
corresponds to the IN1-4 software display channel, and 0-3 is only for example The actual
number of channels shall prevail the device model.
2. In the function on/off settings, 1 is open and 0 is off; For example, set:output#mute#0-3#1 The
last 1 stands for "turn on mute".
5.4.1 Input volume control and acquisition
set:input#gain#0-3#1
(Setting: Enter #Gain #Channel Number # to 1dB)
To Next Page
Loading...