Operating Manual for Digital Sound Processor (DSP) V3.0
WWW.INTREND-AV.RU
40
Similarly, users can use right button to set part menu at output channels, which can be carried out
based on requirements.
3
.4.18 Camera Tracking
Voice tracking set tracking threshold: detect microphone input signal greater than or equal to
tracking threshold, the system automatically enable tracking parameters
Default Mike: when all Macs are not input, turn the camera to the default MIC set position reaction
time: the maximum intermittent time of the valid signal. If the microphone is used to speak, the
reaction time is set to 3 seconds, and the signal is still considered to be valid for 3 S in the middle of
the speech, and more than 3 S, is regarded as invalid. Cut back the default Mike time: the shortest
speaking time required for the camera to switch to a valid position. If the microphone is used to
speak, the speaking time must be longer than the "switching time ", the channel signal is considered
to be valid, and then the camera automatically turns to the set position. Usually "switching time" is
greater than "reaction time ". Wheel gap: the number of times each time a camera switch command
is sent: the number of times a camera switch command is sent, such as 0 for special processing, only
once triggered.
To Next Page
Loading...
Need help?
General