Operating Manual for Digital Sound Processor (DSP) V3.0
WWW.INTREND-AV.RU
72
5.4.19 Get the name of the scene that is set arbitrarily
set:scene#name#0-3#pre1 (PC only supports UTF-8 encoding, Chinese ANSII code will become
garbled)
get:scene#name#0-3 (scene number: 0-15) -> get:scene#name#0-3#pre1#pre1#pre1#pre1#pre1
5.4.20 Module name:input,output|mixer
item ċ:
(input)mute,gain,sens,phant,type,freq,name,phase,step,link,level
(output)mute,gain,name,step,link,level
(mixer)switch,gain
(scene)toggle,save,name
(sysctl)mute
(rescene)
(refactory)
5.
4.21 Format the instruction:
set: Module name #itemname #Start Channel-End Channel # Parameter value
For example
set:input#mute#0-3#0/1
5.
4.22 Get the instruction format
get: Module name #itemname #Start Channel- End Channel
For example
get:input#mute#0-3
To Next Page
Loading...
Need help?
General