Invacare Comet Series PRO - Rollator Bracket; Attaching the Rollator

Invacare®CometSeries
Themountingbrackets(1)forattachingthebelt,arelocatedunder
theseat(thefigureshowsonlythelefthandside).
1.Takeholdofthebeltmountingandholditinfrontoftheholein
themountingbracket.
2.
Positionthebolt(1),screwthenutonfromtheothersideand
tightenwithawrench.
3.
Repeatsteps1–2ontheoppositesideoftheseatwiththe
remainingsideoftheposturebelt.Checktoensurethatthenut
istightenedproperlyonthebolt.
5.2Rollatorbracket
Yourscootercanbefittedwithanoptionalrollatorbracket.Only
thefollowingrollators,whichhavebeenapprovedbyInvacare,canbe
transportedusingthisbracket:
•DolomiteJazz600
•DolomiteLegacy600
•InvacareBanjoP452E/3
Themaximumpermittedrollatorweightis9kg.
CAUTION!
Riskoftippingasaresultofalteredcenterof
gravity
Thecenterofgravityofthescootershiftstowardsthe
backasaresultofattachingtherollator.Themaximum
safeangleofinclineistherebyreducedbyupto2°.
–Notethatgradientsthatyouwouldnormallybeable
tonegotiatemaynowbetoosteepandthescooter
couldtip.Donotattempttoclimbordescendsuch
gradients.
5.2.1Attachingtherollator
DolomiteJazz600
281603455-A