Why Invacare Personal Care Products ceiling hoist does not traverse the rails?
If the Invacare ceiling hoist isn't moving along the rails, the rails may require service or cleaning, so inspect the rail system. If you are using Robin Mover™, the driving wheels might be worn or damaged, in that case you should adjust driving wheels. Also, the hand control could be defective, so replace the hand control.
Why do Invacare Lifting Systems straps only move downwards?
If your Invacare Lifting Systems hoist straps only move downwards, it could be due to a nearly discharged battery. Try putting the hoist on charge or using the emergency battery. Alternatively, the load might be too high; reduce the load, as the hoist has an over-current safety system. Also, check the hand control, its connection, and the re-entering endstop.
What to do if Invacare Lifting Systems hoist hand control is not responding?
If your Invacare Lifting Systems hoist is not responding correctly to the hand control buttons, but the up/down buttons on the hoist are working, make sure the hand control is securely plugged in. If it is, the hand control may be defective and need to be replaced.
Why do Invacare Lifting Systems straps only move upwards?
If the Invacare Lifting Systems hoist straps only move upwards, the hand control might be defective and require replacement. Also, check if the loose strap function is activated and, if so, check the loose strap switch.
How to fix constant speed on Invacare Lifting Systems hoist?
If your Invacare Lifting Systems hoist speed remains the same regardless of the load, the non-load quick movement function might be permanently activated. Check the quick movement switch.
Why Invacare Medical Equipment ceiling hoist speed is the same with and without load?
If the speed of your Invacare Medical Equipment ceiling hoist is the same with and without a load, contact an Invacare representative or specialized dealer for service. The non-load quick movement function may be permanently activated. Alternatively, clean or replace the hooks, as the lifting hooks may not turn freely enough; for this, contact an Invacare representative or specialized dealer for service.
What to do if no indicator light on Invacare Medical Equipment hoist?
If there is no indicator light on your Invacare Medical Equipment hoist, check that the ceiling hoist has a power supply and that the battery is recharged. Also, place the hand control in the charging station and recharge the ceiling hoist.
Why Invacare Medical Equipment ceiling hoist does not traverse the rails?
If your Invacare Medical Equipment ceiling hoist does not traverse the rails, contact an Invacare representative or specialized dealer for service. The rails may require service or cleaning. Also, if you have a Robin™ model, the trolley might be worn or damaged and need replacement. If you have a Robin Mover™ model, the driving wheels may be worn or damaged and need adjustment, or the hand control might be defective and need replacement.
How to fix Invacare Medical Equipment ceiling hoist that will not charge?
To address this issue with your Invacare Medical Equipment ceiling hoist, first check that the power supply is switched on and connected to the charging station. If this does not solve the problem, contact an Invacare representative or specialized dealer for service.
What to do if Invacare Robin Medical Equipment lifting straps will only move down?
If the lifting straps on your Invacare Medical Equipment only move down and not up, it could be due to a nearly discharged battery. Try charging the battery or using an emergency battery. Another possibility is that the load is too high, as the hoist has an over-current safety system. Try reducing the load.
General| Brand | Invacare |
|---|---|
| Model | Robin |
| Category | Medical Equipment |
| Language | English |
To Next Page
