10. Service schedule
Service and maintenance of the hoist must be carried out only by trained/experienced personnel
Personnel hoist serial number: __________________________________
Inspection point: Date:
Inspection of the track system
All bolts/fixtures to wall and ceiling must be checked and
re-tightened if necessary.
End stops on the tracks must be checked, moved if necessary
and re-tightened.
Systems with track connections should be checked and
re-aligned if the connection has become mis-aligned during
use.
Check trolley and traverse trolley.
Check trolley wheels for smooth movement and abnormal
noise.
Check friction break adjustment on trolleys.
Adjust if necessary.
Inspection of hoist
Mechanical parts:
Check suspension- and cross pin.
Check steel- and plastic gear wheels for wear and damage.
If gear wheels are dry, apply gearwheel grease
(see »accessories«)
Check loose strap sensor and adjust if necessary.
Check guide cylinder and end stops.
Check straps for wear and damage.
Check the lifting hooks, screws and pins for wear and damage.
Electrical parts:
Check the wiring for damage and correct connections.
Check micro switches for clamping and mechanical function.
Check hand control for damage and function.
Make sure that the hand control is connected correctly.
Check emergency stop and emergency lowering.
30
To Next Page
Loading...
Need help?
General
