InMode Without Vasculaze Operator Manual
Section 4: Device Description
Figure -6: Utilities Screen
The Utility Screen contains:
This function allows the user to adjust the System volume.
Drain water from the Handpiece (Diolaze, DiolazeXL and
Lumecca only) and device prior to shipment and fill water
during installation.
Change the password by entering the old password and then
entering another 4-digit password.
External validation module for optical Handpieces –Diolaze,
DiolazeXL and Lumecca.
Return to the Main Menu to select the Handpiece.
After returning to the Menu Screen and choosing the application on the Menu Screen
the corresponding Treatment Screen appears.
Pressing the DIODE icon on the Menu Screen will open and the Diolaze or DiolazeXL
Treatment Screen will open according to the attached handpiece.
To Next Page
Loading...