Invasix InMode - Tip Cleaning Instructions Prior to Use; Treatment Recommendations

InMode Without Vasculaze Operator Manual
Section 7: DiolazeXL Treatment
Information

45 of 96
 Pre-Treatment Recommendations
During the patient’s first visit the treating attendant should:
 Complete or update the patient's medical and physical history.
 Exclude from treatment anyone with the listed contraindications.
 Determine why the patient is seeking treatment and what his/her expectations
are.
 Inform the patient about treatment arrangement, typical treatment results and
possible side effects and discomfort.
 Instruct the patient about the safety warnings.
 Advise the patient to avoid skin irritation or skin tanning. Sunscreen is advisable
during outdoor activity at daylight hours.
 The patient should discontinue any irritant topical agents for 2-3 days prior the
treatment.
 Stop anticoagulants 7-10 days prior to treatment, if medically permitted.
 Photograph the patient.
 Mark the treatment area with a white marker.
 Clean the s parts that come in contact with the skin with 70% alcohol.
 The treatment area should be shaved prior the treatment. Hairs may absorb
light and leave burn mark on the skin.
 Tip Cleaning Instructions Prior to Use
Clean the output window with 70% alcohol absorbed pad for at least 30sec and dry
completely.
Leave it for complete drying.
 Treatment Recommendations
 Follow Device Start-Up procedure from the System Operation section.
 Ensure that skin is clean.
 Apply a thin layer of water-based gel to the treated area