InMode Without Vasculaze Operator Manual
Safe Use of the Active Accessories
Examine the connection of the Handpiece through the Connector to the System
before using. Ensure that the accessory functions as intended. Improper
connection may result in arcs and sparks, accessory malfunction, or unintended
treatment effects.
Do not wrap the Handpiece cords around metal objects. It may induce current
that could lead to electrical shocks, fire or injury to the patient or personal.
Don’t direct the laser or IPL towards the window, other treatment attendants or
on patient areas that are not intended to be treated.
When using the RF applicators, ensure that all electrodes are in full contact with
the skin. Bad coupling of both electrodes (FORMA/PLUS, BodyFX/MiniFX) with
the skin results in a specific warning sound, a message on the screen, and
disabling of RF.
Warnings
Do not connect a wet accessory to the System.
Do not immerse the Applicator under water at any time.
This equipment is for use only by trained, licensed physicians.
Only Handpieces manufactured or approved by Invasix Ltd. should be used
with InMode System.
Connect the Power Cord to a properly polarized and grounded power
source with the frequency and voltage characteristics that match those
listed on the back of the unit.
Connect the System Power Cord to a properly grounded receptacle. Do not
use power plug adapters.
Always turn off and unplug the device before cleaning.
The patient and treatment attendants must use protective eyewear during
the use of laser and IPL.
To Next Page
Loading...