Invision SL7D - Page 13

11
SL7D REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
1. POWER ( )
Press this button to turn the system ON�
Press the button again to turn the system
OFF� (Figure 8)
2. Monitor Select (M1 and M2)
Press this button to select a monitor to
control� (Figure 8)
M1- Press to control the M1 monitor�
M2- Press to control the M2 monitor�
3. SOURCE
Press this button to change the AV source
between DVD/USB, HDMI/MHL, M2 (M1),
A/V IN, GAME (optional)� (Figure 8)
4. TV
Refer to Item 15�
5. DVD Source
This button is only active when the
remote control is in the DVD mode and
a USB device is connected� This button
is used to switch between sources (DVD
and USB)� (Figure 8)
6. PIX
This button is used to make picture
adjustments� Use the UP or DOWN
direction buttons to select BRIGHTNESS,
CONTRAST, COLOR, TINT, or RESET� Use
the UP or DOWN buttons to adjust the
settings� The OSD will automatically
disappear if no adjustments are made
within 6 seconds� (Figure 8)
7. SYSTEM MENU
This button is used to make system
setup adjustments� See pages 14 - 23 for
details� (Figure 8)
8. UP/DOWN/LEFT/RIGHT Arrows
Press these buttons to navigate the
menu selections on the screen� (Figure 8)
9. ENTER
Press this button to make an OSD
selection� (Figure 8)
10. SCAN BACKWARD ( )
Press this button to search in the
backward direction� Press this button
repeatedly to change the search speed
from 2, 4, 8, and 16 times the normal
speed� (Figure 8)
11. PLAY ( )
Press this button to initiate play mode
when a disc is loaded in the disc
compartment� (Figure 8)
12. PREVIOUS ( )
When a disc has more than one Chapter,
Track, or File, you can move to another
Chapter/Track/File� Press this button
briey during play to step back to the
previous Chapter for DVD-video or Track/
File for MP3, CD, etc� (Figure 8)
13. PAUSE ( )
Press this button to pause the playback
of a disc� Pressing pause again or
pressing the Play button will resume
normal playback� (Figure 8)
14. SETUP
Press this button to navigate the
DVD Setup Menu� Please refer to the
following pages to congure the
system: General Setup Page, Audio
Setup Page, Preference Page, and
Password Setup Page� (Figure 8)
NOTE: Unit must be set to DVD source.
15. DISPLAY
Press the TV button (4) and
DISPLAY to show monitor status,
modulator status, IR Transmitter
status, M1/M2 ID, Source status�
NOTE: If the TV button is pressed the
remote control will not control DVD
functions until the DVD button is
pressed again.
Press the DVD button (30) and
DISPLAY to show current disc
information while the disc is playing�
In DVD mode, press the DVD button
(30) and the DISPLAY button (15) to
show current disc information� Press
once to show the Title/Chapter/Play
Time information� Press a second
time to show the OSD Subtitle/Audio
Language� Press a third time to show
the Title/Chapter/Time status remaining�
Press the DVD button and hold the
DISPLAY button for 3 seconds to enter
the GO TO mode (change the Disc Title,
Disc Chapter, and Play Time)� Press the
LEFT or RIGHT button to select the Title,
Chapter or Play Time� Use the numeric
buttons to enter the desired Title/
Chapter/Play Time selection� (Figure 8)
16. NUMBERS
Allows the user to select tracks on a
disc during playback or changing the
parental control� (Figure 8)
REMOTE CONTROL OPERATION (continued)