Invision SL7D - OSD Language from Front Panel; OSD Language from Remote Control

21
SL7D REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
SYSTEM SETUP SUBMENUS (continued)
OSD LANGUAGE
OSD LANGUAGE from the Front Panel (M1 and M2) (Figure 18):
1� Press the MENU/SELECT button on the front panel of the system (Figure 12) to show the
System Menu�
2� Use the UP or DOWN direction buttons to select OSD Language and press the ENTER
button to enter the sub-menu�
3� Use the UP or DOWN direction buttons to select the desired language then press the
ENTER to save the setting�
OSD LANGUAGE from the Remote Control
4� Select “M1” on the Remote Control�
5� Press the SYSTEM MENU button then use the UP or DOWN direction buttons (Figure 11)
to select OSD Language and press the ENTER button to enter the OSD Language sub-
menu�
6� Use the UP or DOWN direction buttons to select the desired language then press the
ENTER button to save the setting�
Figure 18
SL7D (M1)
SL7D (M2)