Invitrogen Qubit 4 - Reagent Calculation and Calibration

18 Qubit
™
4 Fluorometer User Guide
Optional : Use Reagent Calculator to prepare Qubit
™
Working Solution
Introduction
Use the on-board Reagent Calculator to quickly determine the correct amount of
Qubit
™
dye and buffer required to make the appropriate amount of Qubit
™
Working Solution required to prepare your samples and standards.
Use the Reagent
Calculator
1. On the Home screen, press Reagent Calculator.
2. Enter the total number of samples and standards that you will be running on
the Qubit
™
4 Fluorometer.
3. Optional: Press the check box for overage if you want to include an additional
tube in the total calculated volume.