Invitrogen Qubit 4 - Fluorometer Mode

Qubit
™
4 Fluorometer User Guide 29
Fluorometer mode
Introduction
You can use the Qubit
™
4 Fluorometer as a mini-fluorometer by selecting the
Fluorometer mode.
The Fluorometer mode allows you to choose the excitation light source (blue LED
or red LED) while reading fluorescence in both the green and far-red emission
channels (for the blue LED) or in the far-red emission channel only (for the red LED).
The reading is in raw fluorescence units (RFU).
Read sample in
Fluorometer mode
1. On the Home screen, press Fluorometer.
2. On the Choose excitation screen, select Blue (470 nm) or Red (635 nm).