Invitrogen Qubit 4 - Export Data

36 Qubit
™
4 Fluorometer User Guide
Export data
Introduction
The Qubit
™
4 Fluorometer is designed for standalone use; it does not require an
external computer. However, to archive data and generate reports, you can export
the numeric data stored in the CSV file to a computer either by using the USB
drive or by saving directly to the computer using the USB cable. You can then
import the file into any spreadsheet program.
Export data using
the USB drive
1. Insert the USB drive into the Qubit
™
4 Fluorometer.
2. On the Concentration, Graph, RNA IQ results, or Home screen, press Data.
3. On the Export data screen, check the selection box to the left of each data set
you wish to export.
4. To save only individual data entries from a data set, press the data set of
interest, and then check the selection box to the left of the samples you wish
to export.
