Qubit
™
4 Fluorometer User Guide
25
3. Insert a sample tube into the sample chamber, close the lid, and then press
Read tube. The reading takes approximately 3 seconds for the quantitation
assays and approximately 5 seconds for the quality assays.
4. The software displays the results. See “Results screen” on page 26.
Results screen for quantitation
Results screen for quality
samples
To read multiple samples for the same assay:
1. Remove the current sample, and insert a new sample.
2. To change the sample volume, swipe right or press the left arrow.
3. Press Read tube.
4. Repeat step 2 (page 24) and step 3 (page 25).
To Next Page
Loading...
