List of Function Parameters
105
Function Code Name LCD Display
P8.02 Jog reference JOG REF
P8.03 Jog acceleration time JOG ACC TIME
P8.04 Jog deceleration time JOG DEC TIME
P8.05 Skip frequency SKIP FREQ
P8.06 Skip frequency bandwidth SKIP FREQ RANGE
P8.07 Traverse amplitude TRAV AMPLITUDE
P8.08 Jitter frequency JITTER FREQ
P8.09 Rise time of traverse TRAV RISE TIME
P8.10 Fall time of traverse TRAV FALL TIME
P8.11 Auto reset times AUTO RESET TIMES
P8.12 Reset interval RESET INTERVAL
P8.13 FDT level FDT LEVEL
P8.14 FDT lag FDT LAG
P8.15 Frequency arrive detecting range FAR RANGE
P8.16 Brake threshold voltage BRAK VOLT
P8.17 Coefficient of rotation speed SPEED RATIO
P9.00 PID preset source selection PID PRESET
P9.01 Keypad PID preset KEYPAD PID SET
P9.02 PID feedback source selection PID FEEDBACK
P9.03 PID output characteristics PID OUTPUT
P9.04 Proportional gain (Kp) PROPORTION GAIN
P9.05 Integral time (Ti) INTEGRAL TIME
P9.06 Differential time (Td) DIFFERENTIA TIME
P9.07 Sampling cycle (T) SAMPLING CYCLE
P9.08 Bias limit BIAS LIMIT
P9.09 Feedback lost detecting value FEEDBACK LOST
P9.10 Feedback lost detecting time FEEDBACK LOST(t)
PA.00 Multi-step speed 0 MULTI-SPEED 0
To Next Page
Loading...
Need help?
General