List of Function Parameters
106
Function Code Name LCD Display
PA.01 Multi-step speed 1 MULTI-SPEED 1
PA.02 Multi-step speed 2 MULTI-SPEED 2
PA.03 Multi-step speed 3 MULTI-SPEED 3
PA.04 Multi-step speed 4 MULTI-SPEED 4
PA.05 Multi-step speed 5 MULTI-SPEED 5
PA.06 Multi-step speed 6 MULTI-SPEED 6
PA.07 Multi-step speed 7 MULTI-SPEED 7
PB.00 Motor overload protection MOTOR OVERLOAD
PB.01 Motor overload protection current OVERLOAD CURR
PB.02 Threshold of trip-free TRIPFREE POINT
PB.03 Decrease rate of trip-free TRIPFREE DECRATE
PB.04 Over-voltage stall protection OVER VOLT STALL
PB.05 Over-voltage stall protection point OV PROTECT POINT
PB.06 Auto current limiting threshold CURR LIMIT POINT
PB.07 Frequency decrease rate when current limiting FREQ DEC RATE
PC.00 Local address LOCAL ADDRESS
PC.01 Baud rate selection BAUD RATE
PC.02 Data format DATA FORMAT
PC.03 Communication delay time COM DELAY TIME
PC.04 Communication timeout delay COM TIMEOUT
PC.05 Communication error action COM ERR ACTION
PC.06 Response action RESPONSE ACTION
PD.00
Low-frequency threshold of restraining
oscillation
RES OSC L POINT
PD.01
High-frequency threshold of restraining
oscillation
RES OSC H POINT
PD.02 Amplitude of restraining oscillation RES OSC AMP
PD.03 Boundary of restraining oscillation RES OSC BOUND
To Next Page
Loading...
Need help?
General