INVT Goodrive200A Series

GD200A series VFD Basic operation instruction
-100-
Start
Power on after right wiring
Restore to the factory
parameters (P00.18=1)
G/P selection(P00.17)
P02.01~P02.05
Press QUICK/JOG to jog
If the rotation direction is
wrong, power off to change
the wires and repower on
Autotuning mode
P00.15=1 P00.15=3
Press RUN to autotune
and then stop
Set running frequency
Set ( P00.01,P00.02)
P00.15=2
P00.00
P00.00=1 P00.00=2
Set P03 Set P04
Set P01
Run
Stop
End
Set
Note: If fault occurs, please do as the "Fault Tracking". Estimate the fault reason and settle the
issue.