INVT Goodrive200A Series User Manual

GD200A series VFD Product overview
-9-
Function
Specification
Peripheral
interface
Terminal analog input
resolution
≤ 20mV
Terminal switch input
resolution
≤ 2ms
Analog input
1 channels ( AI2) 0 (2)–10V/0 (4)–20mA and 1
channel (AI3) -10–10V
Analog output
2 channels (AO1, AO2) 0 (2)–10V /0 (4)–20mA
Digital input
8 channels common input, max. frequency: 1kHz,
internal impedance: 3.3kΩ;
1 channel high speed input, max. frequency: 50kHz
Digital output
1 channel high speed pulse output, max. frequency:
50kHz;
1 channel Y terminal open collector pole output
Relay output
2 channels programmable relay output
RO1A NO, RO1B NC, RO1C common terminal
RO2A NO, RO2B NC, RO2C common terminal
Contactor capability: 3A/AC250V,1A/DC30V
Others
Mountable method
Wall, flange and floor mountable
Temperature of the
running environment
-10–50°C , derating is required if the temperature is
above 40°C . If the ambient temperature is above
40°C, derate 1% for every additional 1°C.
Ingress protection
IP20
Cooling
Air-cooling
Pollution level
Level 2
Braking unit
Built in 030G/037P and lower models.For other
models, it is an optional part.
EMC filter
380V series products can meet the requirements of
IEC61800-3 C3
External optional filter: meet the requirement of
IEC61800-3 C2
3.4 Nameplate
IP20
Model: GD200A-037G/045P-4
Power(Output): 37kW/45kW
Input: AC 3PH 380V(-15%)-440V(+10%) 80A/94A 47Hz-
63Hz
Output: AC 3PH 0V-Uinput 75A/92A 0Hz-400Hz
S/N: Made in China
Shenzhen INVT Electric Co.,Ltd
Figure 3-3 Nameplate
Note: This is the example of the nameplate for the standard products, and CE\TUV\IP20 will be
marked according to the actual situations.

INVT Goodrive200A Series Specifications

General

Brand	INVT
Model	Goodrive200A Series
Category	DC Drives
Language	English