Inxpect LBK Series User Manual

iv
LBK System Series| Instruction manual v1.2 SET 2021 |SAF-UM-LBKBus-en-v1.2|© 2020-2021 Inxpect SpA
Glossary of terms
1
1oo2
(one out of two) Type of multi-channel architecture where one area is monitored by two sensors at the
same time.
A
Activated output (ON-state)
Output that switches from OFF to ON-state.
Angular coverage
Property of the field of view that corresponds to the coverage of 110° or 50° on the horizontal plane.
D
Dangerous area
Area to be monitored because it is dangerous for people.
Deactivated output (OFF-state)
Output that switches from ON to OFF-state.
Detection distance 1
Depth of the field of view configured for detection field 1.
Detection distance 2
Depth of the field of view configured for detection field 2.
Detection field 1
Area of the fieldset closer to the sensor. In the absence of detection field 2, it corresponds to the whole
fieldset.
Detection field 2
Area of the fieldset that follows detection field 1.
Detection signal 1
Output signal that describes the monitoring status of detection field 1.
Detection signal 2
Output signal that describes the monitoring status of detection field 2.

Inxpect LBK Series Specifications

General

Brand	Inxpect
Model	LBK Series
Category	Safety Equipment
Language	English