Connecting to PC
9.
21
1 First, properly connect the device to a PC using the provided cable as shown below.
2 It is recommend that you not use the USB ports on the front of your PC. It may cause
issues, such as partition damage due to connectivity error.
3 Even though the device is connected to a USB 3.0 port, it may perform as slow as
USB 1.1 or USB 2.0 speeds. (If this is the case, contact your PC manufacturer for
optimal BIOS settings to improve your connection speeds.)
4 Current connection status is indicated by in the upper-right corner of the
LCD screen.
(SS=3.0 HS=2.0 FS= 1.1)
To Next Page
Loading...
