ion science TIGER - Accessories

TIGER MANUAL Ion Science Ltd
Page 41 of 45
Unrivalled Detection. www.ionscience.com
Accessories
Ion Science Ltd has developed an exclusive range of high quality accessories to compliment the TIGER.
Please see a selection of these below:
Part Number
Accessory Description
1/jawu-01
Car Charger Lead – Allows the Charger Cradle (A4) to be powered from a
standard vehicle cigar lighter (12 volt only)
A-861214
Sensor Seal (9) – Seal between the MiniPID 2 Sensor (A6) and the
Sensor Cover (A5)
846216
Mini PID electrode stack removal tool – Used to remove Stack / Pellet from
the MiniPID 2 Sensor (A6)
861205
Protective, Removable Rubber Boot (8) – Supplied with every TIGER, this
is a replacement
861219
Filter Clamp (12) – Transparent clamp that covers the PTFE filter and
accepts the Inlet Nozzle (14)
861230
USB Cable – Supplied with every TIGER, this is a replacement
861266
Leather instrument holster – TIGER can be carried on a belt around the
waist allowing hands free operation
861412
Leather instrument harness – TIGER can be carried against upper body
allowing hands free operation
880207
Inlet probe – new stronger design. Standard from January 2016
880202
Probe seal (used with 880207 above) Standard from January 2016
880201
Filter clamp (used with 880207 above) Standard from January 2016
A-880210
Probe upgrade kit – Contains 880207, 880202 and 880201 (above)
861443
Inlet Probe (14)
5/OV-04
O’ring for use with Inlet Probe (14)
A-861474
O’rings for use with Inlet Probe (14) pack of 5
861476
Calibration Adaptor – Must be used when calibrating using flow regulators
A-31057
Carbon Filter – Used during calibration to set a zero
A-31063
PID Lamp Cleaning Kit- Contains Alumina powder and 40 cotton buds
A-861413
5m Extension Hose – Replaces the standard probe, pipe material: PTFE
A-861414
10m Extension Hose – Replaces the standard probe, pipe material: PTFE
A-861415
Diluter – Dilutes immediate sample with ambient air
A-861406
Flexible Probe – 300mm, replaces the standard probe, internal pipe
material: PTFE
A-861240
Lithium ion battery pack, intrinsically safe – Replacement / spare
A-861241
Alkaline battery pack, intrinsically safe. 3 x AA batteries included –
Replacement / spare
A-861267
Accessory box as supplied with the TIGER – Includes carbon filter, lamp
cleaning kit, PID Stack / Pellet removal tool, lanyard, calibration adaptor
and PID sensor seal
A-861472
PTFE filter discs (pack of 10)
A-861511
Anti-vibration charger cradle – Allows wall mounting of vehicle charging,
includes charge cradle
LA4TM600
Lamp 10.6eV