Ion Technologies IT- DS05-S User Manual

IONTECH
®
IT-DS EDI Modules
Flexible hose is ideal for connecting cleaning equipment to the system. Verify that the
construction materials of the valves and hose are compatible with the cleaning solutions.
4.2.4 System Preparation for Cleaning or Sanitization
NOTE: The following cleaning procedures are based on the piping set up shown in Figure 4-1. If your
piping setup is different, you may need to alter these procedures.
1.
2.
3.
4.
5.
6.
Turn off the DC power supply.
Close the following valves to the IT-DS system: Feed and Product
Connect the discharge of the cleaning pump to the IT-DS feed CIP connection.
Connect the module's feed, reject and product CIP connections to the cleaning tank. Verify
that all piping connections are secure.
Close cleaning pump discharge valve until ready to pump the cleaning solution into the IT-
DS module.
Figure 4-1 Typical cleaning skid arrangement
IT- DS
22 IT-DS MAN Rev 0

Ion Technologies IT- DS05-S Specifications

General

Brand	Ion Technologies
Model	IT- DS05-S
Category	Control Unit
Language	English