Ion Technologies IT- DS05-S - Page 3

IONTECH
®
IT-DS EDI Modules
3 .5 START-UP Procedure 18
3.5.1 Start-up IT-DS module 18
3 .6 Recovery, Silica and Hardness 18
4 MAINTENANCE AND TROUBLESHOOTING 19
4 .1 General Maintenance Guidelines 19
4.1.1 Operating Data Log Sheets 19
4.1.2 Periodic Maintenance 20
4 .2 Specific Maintenance Guidelines 20
4.2.1 Cleaning Circumstances 20
4.2.2 Sanitization Circumstances 20
4.2.3 Required Cleaning and Sanitizing Equipment 21
4.2.4 System Preparation for Cleaning or Sanitization 22
4 .3 Cleaning and Chemical Sanitization Procedures 23
4.3.1 Cleaning with 2.0% Hydrochloric Acid (HCl)
4.3.2 Cleaning with 5% Brine/1% Caustic Solution
4.3.3 Cleaning or Sanitizing with Sodium Percarbonate
4.3.4 Cleaning or Sanitizing with Peracetic Acid
4.3.5 Cleaning and Sanitizing with Multiple Cleaning Agents
24
25
26
29
32
4 .4 Troubleshooting 33
5 SHUTDOWN AND STORAGE 40
5 .1 System Shutdown 40
5 .2 Startup after Shutdown 40
APPENDIX A: IT-DS MODULE SPECIFICATIONS 41
APPENDIX B: JUNCTION BOX ELECTRICAL CONNECTIONS IT-DS 42
APPENDIX C : LAYOUT AND ELEVATION DRAWING IT-DS 43
3 IT-DS MAN Rev 0