ioSafe Duo User Manual 39
Appendix: Technical Specifications
Product Model ioSafe Duo
Fire Protection Up to 1550° F, 30 minutes per ASTM E-119
Water Protection Fully submersed, fresh or salt water, 10 foot depth, 72 hours
Theft Protection Metal Kensington Lock Slot
Interface Types &
Speeds
USB 3.2 Gen 2: up to 10 Gbps
Front USB Peripheral
Connectors
One (1) USB Type-A connector
One (1) USB Type-C connector
Rear Data Connector One (1) USB Type-C connector
Host Compatibility USB 2.0, 3.0, 3.1, and 3.2 ports
Supported Drive Types 3.5-inch SATA hard drives
2.5-inch SATA hard drives
2.5-inch SATA SSDs
Complete list of qualified drive models available on iosafe.com
Drive Bays 2
Max Internal Capacity 28 TB (14 TB x 2)* (Capacity may vary by RAID mode)
Torque
2.5-inch drives, M3 screws: 4 inch-pounds max.
3.5-inch drives, #6-32 screws: 6 inch-pounds max.
Supported RAID Types JBOD, SPAN, RAID 0, RAID 1
RAID Configuration Jumper pin
Number of LEDs 3
Description of LEDs HDD1 status/activity, HDD2 status/activity, power on/fan failure
Temperature LED Alert Yes
Supported Operating
Systems
Windows 10 and 8.1
macOS 10.13 “High Sierra” or newer
Linux distributions that support the connection type used
Cooling Fan One (1) 92mm cooling fan
Variable Fan Speed Yes
Power Switch Illuminated push-button switch
Power Supply Unit 60W 12V 5A Adapter
Environmental
Requirements
Line voltage: 100V to 240V AC
Frequency: 50/60Hz, Single Phase
*Product has been tested with up to 14TB drives, but may support larger drives.
To Next Page
Loading...
