6.2 Bluetooth
®
Helpful Tips
• The Bluetooth
®
connectivity should automatically establish when the app is initiated.
• Bluetooth
®
connectivity can be verified in the top bar of any screen on the app. If the Bluetooth
®
logo has a red cross on it, the app is not connected to the tester and Bluetooth
®
must be
reestablished.
• Bluetooth
®
connectivity should be established within IPA
®
apps, not through the main settings of
the tablet.
• To re-establish Bluetooth
®
connectivity, press the icon to start scanning for available devices.
• When establishing connection, avoid other Bluetooth enabled devices, such as phones, speakers,
and other tablets.
6.3 Bluetooth
®
Module FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To Next Page
Loading...
