GB
! IMPORTANT!
Follow the instructions given below to congure the machine’s control software to use the
display language you require.
See the “Technical menu” section.
Lifting and transporting the machine
! WARNING!
All phases of lifting and moving must be performed in an adequately illuminated
environment with the adoption of the safety measures most appropriate to the situation.
The operator must always use personal protection devices.
Proceed as follows to load the machine onto a means of transport.
► Empty the tanks.
► Remove the batteries.
► Position the machine on a pallet and x it in place with plastic straps or metal brackets.
► Lift the pallet (with the machine) using a fork lift truck and load it onto the means of trans-
port.
► Anchor the machine to the means of transport with cables connected to the pallet and to
the machine itself.
19
To Next Page
Loading...
