IPC CT80 - Machine Controls

GB
Controls
► Emergency switch (g. 9, ref. 1): pushing
the safety lever towards the tank, when nec-
essary or in the event of imminent danger,
stops all the machine’s functions, opening
the electrical circuit that supplies power to
the machine.
► Accelerator pedal (g. 9, ref. 2): press this
pedal to control the speed of the machine.
If the accelerator pedal is released for more
than three seconds while the machine is
switched on, the “ AUTO POWER-OFF”
function switches o󰀨 all machine functions.
To start again, simply press the accelerator
pedal. To enable/disable and change the de-
lay for “AUTO POWER-OFF” mode, go to the
”Technical menu”.
► Battery charger socket (g. 10): if the ma-
chine is not tted with a battery charg-
er, to recharge the batteries, plug in the
connector highlighted, see ”Preparing
the battery charger”.
► Main switch (g. 11, ref. 1): Switches
power to all machine functions on/o󰀨.
9
BATTERY
CHARGER
3
10
1
11
1
2
21